

FLOWPOINT: RAPID SET FLOWABLE GROUT
UltraScape Flowpoint grout exceeds all the requirements of the latest British Standard. It has been in use for over 20 years in a variety of project environments including public realm, landscaping and domestic. UltraScape Flowpoint is synonymous with fast application, cost effective and robust jointing.
-
Open to foot traffic in 1 hour
-
Open to vehicular traffic in 4 hours
-
Rapid setting
-
Exceptional bond strength
-
Shrinkage compensated
-
Mixes quickly on-site with water
-
Initial set after 15 minutes at 20°C
-
Economical to use
-
Conforms to BS 7533
-
Ideal for large-scale projects
-
Available in charcoal and natural grey
-
Approved for use on the London Underground and Overground
-
25kg paper bags

We are main stockists of building chemicals from the following manufacturers:
We have provided a selection of our stocked products below however if you can’t see the product you need , please contact us and we will source the item for you as we have a vast range available to us.


Is an air entraining plasticiser that replaces lime in the mix to provide an easy to work. Prevents shrinkage, cracking and crazing. Provides long term resistance to freeze-thaw cycles when set. Tested to BSEN934-Part 3.
Liquid additive that provides long-term water protection to mortar, concrete and rendering. Suitable for applications such as tank linings, roof areas, rendering / pointing and structures below ground level. Tested to BSEN934-Part 3.
A liquid additive formulated to accelerate setting and hardening times of mortar, concretes, screeds and rendering to provide frost protection during the setting period. Effective in sub-zero temperatures.
Waterproofs, plasticises and retards. Assists workability, reduces water penetration and allow larger areas to be covered in one application. Primarily formulated for use in renders, dry dash and pebble-dashing. Tested to BS4887 1973.
Is a highly effective release agent to enable concrete shuttering to be removed easily, leaving the edge of the concrete structure clean and well formed. Suitable for most types of form work. Not affected by rain after application.
A double action frost-proofer and air entraining mortar admixture for use throughout the winter period. Increased workability and resistance to frost when wet or hardened. Chloride free, suitable for steel reinforced concrete structures.
Formulated from best quality oxide pigments for permanently colouring all types of mortars, rendering, concrete and pointing. The pigments disperse easily into the mix to give a uniform shade for each mix batch.
The world's first 1:25 plasticiser is just Pure Admix, works like the best traditional Admix. Benefits include: superior plasticising action, controlled dosage, consistent mix design, easy to use, no waste. Tested to BSEN934-Part 3.
Cement based product, used to level out uneven floors and screeds. The compound provides a free flowing mix that sets in 90 minutes and can be overlaid after only 8 hours at normal temperatures.
Floor Flex Plus is a premium rubber based latex additive for use with Self Level Floor Compound and powder tile adhesives to both strengthen the mix and provide a limited degree of movement capability in the sub floor. Ideal for use on timber floors.
Geo-Fix is acknowledged as the original and still the best Paving Jointing Compound. It is available ready to use and is air cured for pointing all types and sizes of paving. Geo-fix is simply brushed into cracks will not crack or wash out.
New break through formula that solves the perennial problem of applying jointing compound in wet weather. Time and labour saving benefits of standard Geo-Fix, supplied in ready mixed, sealed foil bags to ensure the product is perfectly fresh.
A high performance transparent water repellent specially formulated to prevent water penetration on all mineral substrates such as brick, stone, concrete, pebble dashed and rendering. Does not contain harmful solvents.
Brick & Patio Cleaner is a fast acting acid based formula (9.5% strength) that dissolves mortar and cement stains and ingrained dirt and paint on most mineral surfaces such as brick, stone, concrete, paving flags and earthenware.
High performance long term protection surface coating specially formulated to make tired old tarmac look just like new. Tough, durable, low sheen finish which protects from weathering, oil and petrol spills and weed growth. Dries in 4 hrs.
Formulated from high quality silicate resins to both harden and dustproof new and old concrete floors for both internal and external use. It reacts chemically with the lime content of concrete to form a hard-wearing surface.
Mortar Stain Remover is a highly concentrated fast acting acid based formula (18% strength) which dissolves mortar and cement stains, ingrained dirt and most paints on mineral surfaces such as brick, render and concrete.
One-part, silicone based, clear coating for use on porous surfaces, designed to protect against costly damage caused by spray paints, marker pens and fly posting. Allowing removal of graffiti using just water and detergent.
Acts as an invisible seal to paths, patios and driveways and provides long term resistance against staining and algae growth and lasts up to five years. The application can be done in one coat and is suitable to use with most natural stone.
Resiblock Indian Sandstone Sealer Colour Enhancer restores the stone and helps to bring out its natural colours, providing long term resistance against staining and algae growth and lasts up to five years.
Is a solvent sealer used to bond jointing sand and seal the surface of block paving, whilst retaining its normal flexural properties. Available in a gloss wet look or natural matt finish.
Three-part general purpose repair mortar. Formulated to withstand chemicals, impact and abrasion and can be used to repair floors, steps, kerbs and cills, concrete, stone, brick and steel in even the most demanding domestic and industrial situations.
Three part, rapid setting, high strength repair mortar based on epoxy resin technology. Formulated to be durable even the most demanding domestic and industrial situations, especially where same day trafficking is required.
A two-part, fast curing, epoxy resin adhesive blended with fine aggregate for bedding, gap filling and repairs to concrete, brick, stone and steel. No shrinkage and mechanical strength is significantly greater than concrete. Resistant to chemicals and solvents.
An aqueous solution containing complex colloidal silicates. In the presence of water these swell and block the capillaries and pores in the applied renders, screeds and mortar to provide an effective barrier against the transmission of liquid water.
A ready to use very rapid setting leak stopping liquid which is mixed with ordinary portland cement to produce a paste for immediate leak sealing against high water pressure infiltration.
Sika-4a Waterstop is a ready to use quick setting leak stopping liquid which is mixed with water and ordinary portland cement to produce a paste for leak stopping against high water pressure infiltration.
Sika Damp-proofing Slurry is a ready to use (just add water), high quality, thin layer waterproof slurry coating, based on special cements and admixtures to provide a water and damp proof finish. ..
A one-component, water based, general purpose, styrene butadiene rubber emulsion. When diluted with water it produces a gauging solution for improving adhesion, workability and waterproofing of mortars and cementitious mixes.
Mix Plus is a general purpose, economic liquid plasticiser and improver for brick and blockwork mortars.
Sika Mix Powdered Mortar Plasticiser (PMP) is a pre-measured, air entraining admixture which complies to EN 934 and replaces or complements the use of lime in sand and cement bricklaying and rendering.
Sika Accelerator is a cold weather and rapid hardening admixture for mortars screeds and renders.
Water resisting plasticiser for improving renders and screeds, Sika Remdermix can also be used as an 'improver' for pebble dashing or roughcast finishes.
A chloride free, winter working admixture for concrete that is suitable for use with steel reinforcement
Sikaflex®-EBT+ is a multi-purpose one part, elastic, polyurethane adhesive and sealant. It bonds to all common building materials, is permanently elastic and has excellent grab and gap filling properties making it ideal for use in a wide range of building and maintenance situations.
Sika Sanisil is a high quality one part, acetoxy, moisture curing silicone sealant for sealing applications where mildew resistance is required
Sika Lead and Gutter Sealant is a one part, neutral curing, flexible, low modulus silicone based sealant for bonding and pointing of lead and most building materials
SikaBoom-Cleaner is a highly active solvent-based aerosol cleaner of PU Foams.
SikaBoom®-GS is a one part, high yield polyurethane fixing foam applied with the Sika Boom-G Dispenser gun.
SikaBoom®-N+ is a fire retardant foam that is tested to B2 DIN 4102-1. This classification means that it limits the spread of fire and the foam itself is self-extinguishing.
An easy to use, all weather roofing system ideal for waterproofing any flat or pitched roofs. Creating a solid waterproof membrane covering the entire surface area without any seams. Excellent adhesion to both porous and non-porous substrates.
Aresin based, fibre re-enforced roof repair compound which is effective on all common roofing surfaces, giving instant roof repairs even in the wet and on wet surfaces. May also be applied in frosty conditions down to -5°C.
Black Bitumen Paint is a solvent based, full bodied black bituminous paint. When dry, the product forms an odourless and taint free black film suitable for metal protection, and overcoating wood and felt.
Bitumen and Flashing Primer is a thin black primer used to give a key prior to applying bitumen paints, roof coatings and flashing.
Is a bituminous based aluminium protective paint of brushable consistency which dries to a silvery finish. The product is specifically designed for application over primed metal walls and roofs to reduce heat absorption.